Home > Unable To > Unable To Load DLL - Zlib X86.dll

Unable To Load DLL - Zlib X86.dll

Many extensions are built into the Windows version of PHP. I checked the build directory and there is no windows-xpi directory. The installer would download/install the nspr4 that was best for the current OS. This could be done by adding a bogus call into nspr4.dll from the exe and (of course) packaging up a copy of nspr4.dll to be in the ns_temp dir when setup.exe http://webcomputerrepair.com/unable-to/unable-to-load-system.html

I've done as you said, and ensured I've moved every dll you've listed, but I still get the same error. (I've also 'unblocked' all DLLs in case that was the issue) Did perform an uninstall beforehand, and manually removed all traces of the previous mozilla directories from Program Files and windows directories, and removed the registry entries for mozilla.org. In *Control Panel* --> *System* click on *Advanced System Settings* and use the button *Environment Variables*. I'm speculating that it's a build config change that broke this as I can't think of anything that can affect so many different files listed below. http://stackoverflow.com/questions/10774250/dllnotfoundexception-with-hresult-0x8007007e-when-loading-64-bit-dll

Cancelled the install and did a reboot. sorry it seemed to be working, as it showed the configuration to sync calendars, notes, etc ... Getting the extensions to work again:
a.

The above tutorial link is to install php 5.x on Apache 2.2 for Win. Kai Lahmann (is there, where MNG is) - Updated • 15 years ago CC: neroden Kai Lahmann (is there, where MNG is) - Comment 64 • 15 years ago *** Bug my c:\windows\system\Msvcrt.dll is 2001/05/04,6.10.8924.0 version extracted (then deleted during install) is 6.00.8168.0 Hope this helps, or ask me further questions...DaveT Stephen Walker - Updated • 15 years ago CC: charleshixsn Stephen Version 2002-03-30-09 worked fine.

Koike Kazuhiko - Updated • 15 years ago CC: kazhik Asa Dotzler [:asa] - Comment 20 • 15 years ago It would be nice to have this for 1.0. The following table describes some of the extensions available and required additional dlls. My System Specs You need to have JavaScript enabled so that you can use this ... https://github.com/grpc/grpc/issues/905 Still didn't help.

And, php_exif.dll must be loaded after php_mbstring.dll in php.ini. If you encounter an installation failure via a web page, it probably belongs here. Please reopen if problem reoccurs.Status: RESOLVED → VERIFIED K'Trina Medina - Updated • 15 years ago Keywords: fixed1.0.0 → verified1.0.0 Grace Bush - Updated • 15 years ago CC: scott Grace exe Unhandled Exception: System.DllNotFoundException: Unable to load DLL 'grpc_cshar p_ext.dll': The specified module could not be found. (Exception from HRESULT: 0x 8007007E) at Grpc.Core.Internal.GrpcLog.grpcsharp_redirect_log(GprLogDelegate callback) at Grpc.Core.Internal.GrpcLog.RedirectNativeLogs(TextWriter textWriter) at Grpc.Core.GrpcEnvironment..ctor() at

Futher to the above, I tried the installer-sea on a bare install of win95b, with only the dial-up networking/winsock 2 installed (ie no other patches of any kind). navigate to this website Now, when I boot into... I hope it's unrelated, but one thing that I did notice is that I couldn't run the installer from yesterday's nightly/2002-04-28-09-1.0.0 directory. When I set the project to x64, it does not attempt to call uncompress32 and fails to call uncompress64 –GSerg May 27 '12 at 13:36 add a comment| 2 Answers 2

Send those directly to the authors at after checking the FAQ and the manual, of course. this page Good ones are DotNetZip and SharpZipLib, take their first google hit. after that next times opening iTunes had up: "MobileDeviceHelper has stopped working" and froze the program so had to remove again those copied .dll's Guess will have to wait until a Vista General Unable to load new softwareHey, Im trying to download software from the internet but when I try to run the installer I get the message "Windows cannot access the

  • Net Installer fails at the point "Preparing Setup, please wait..." with "1114 : Could not load C:\WINDOWS\TEMP\ns_temp\xpcom.ns\bin\xpistub.dll" Now directory from dos command line on win95: C:\WINDOWS\TEMP\ns_temp\xpcom.ns\bin>dir Datentr├Ąger in Laufwerk C: hat
  • Even after enabling the options in the php.ini file and restarting the Apache service, the mods still would not load.
  • Why are chemical weapons such a big deal?
  • Gerv Kyle Krom - Comment 9 • 15 years ago I'm running Win95 (4.00.950 B).
  • They'll appear in the Output window when you enable unmanaged debugging.
  • It uncovered the specific dll loading problem.
  • It syncs my desk top Outlook contacts directly with my laptop when they're networked.
  • That change is not tested anywhere near enough to be checked in now, but relief is on the way!
  • Sean: heard of any win95-only problems like this?

Grace and Ktrina: have we tested the installer on Win95 recently? There's really not much that can go wrong loading xpistub itself. It loads xpistub.dll which has an implicit link to xpcom.dll which has an implicit link to nspr4.dll. get redirected here Better to rent condo to daughter or put her on title?

Darrel Yurychuk - Comment 80 • 15 years ago Results of my test: - Blew away the Mozilla program directory--whoops there goes all my plugins again. - Tried mozilla-win32-1.0rc1-stub-installer. it worked for me ... Daniel Veditz [:dveditz] (Assignee) - Comment 10 • 15 years ago Microsoft's free dependency walker is available from http://www.dependencywalker.com and also in various larger free packs from microsoft itself.

Could be a one-time build problem, otherwise I'm sure this will get fixed pronto since it will affect all Windows users.

Edit it and append `;C:/PHP` to it - or whatever the path to your PHP root folder is. up down 3 amainATgoldcoastdesignORG ¶8 years ago I just recently tried Chen 2013/8/22 Lee Reid > Hi, > > I downloaded the GDCM-2.2.4-Windows-x86.zip file today and imported > gdcm-sharp.dll into a Visual Studio 2012 project. You should see it probing for the DLL, searching through the directories of the PATH and failing to find the file. URL: 0%3A00&cvsroot=%2Fcvsroothttp://bonsa...

Vista account administration unable to load a dllHi, I am trying to load a dll using Loadlibrary in MFC application. Dveditz, can you look at the link to see if anything catches your eye? Add a shortcut to start the application. http://webcomputerrepair.com/unable-to/unable-to-load-the-file-extension-of-themepack.html I've also tried newer msvc*.dll in the same dir and in my os's system dir.

The nightly builds can be found at ftp://ftp.mozilla.org/pub/mozilla/nightly/latest and ftp://ftp.mozilla.org/pub/mozilla/nightly/latest-1.0.0 . Performance Central is your source for news, >> insights, >> analysis and resources for efficient Application Performance >> Management. >> Visit us today! >> http://pubads.g.doubleclick.net/gampad/clk?id=48897511&iu=/4140/ostg.clktrk >> _______________________________________________ >> Gdcm-developers mailing list Again, download the binaries, NOT the installer.

3. Thanks for the help, John.

These days included with the Windows SDK. Your managed code loads gdcm-sharp and then, it uses > gdcmsharpglue to access all native modules. Thanks nickdul commented Oct 6, 2015 Which version of the toolset/platform should I use to run on x64? If matrix is diagonalizable, eigenvalue?

Removing UEStudio from my PATH has resolved the Sync Server issue for me too. Your solution worked for me too.