Home > Hard Drive > Secondary Hard Drive Freezing Computer

Secondary Hard Drive Freezing Computer

Contents

That would be all, if you have any comments or suggestions, reach for the comment section, below. Everything works like a charm. I've updated my sound driver. I managed the installation of the hardware on my own, but was at a loss on how to assign the drive letter. http://webcomputerrepair.com/hard-drive/secondary-hard-drive-disappears.html

Thanks, hope to hear from you or another one of the commenters soon. The time now is 09:32. After disconnecting the new HDD from its port and rebooting, everything would load normally. andyscreationsJun 14, 2014, 12:14 PM I had the same problem and found the SOLUTION.... https://www.eightforums.com/general-support/31905-secondary-hard-drive-causing-freezing-issues-lock-ups.html

Secondary Hard Drive Freezing Computer

About The Author PCMech Staff177 Comments Ryan on July 29, 2007 at 1:33 pm For a step by step installation procedure, it would be nice if it was written in plain I then ran Diskpart. Well it sounded so simple but no matter what I do I cannot get the computer to recognize my old drive connected to the slave connecter on the cable. Ill just bring it back to my computer guy who put it together.

  • Lol.
  • Read Also: How to Fix Windows 10 Network Adapter Problems Tags: windows 10 fix How to Keep Using Windows XP after 2014 10 Best Bluetooth Keyboards for Windows 10 Red Stripe
  • If you are confident in yourself and would like to save the money a computer guy would charge to do it, go ahead and do it yourself.

Ask ! Joshcore, if you are blindly defending your precious website PC Mech, then please, at least have a decent reason to do so. Check to see if anything is blocking it; antivirus, uac, or windows firewall. Computer Won't Power On With Hard Drive Plugged In Check to make sure that no cables are loose.

New hard-disk boot problems Hard disk's "in-game" performance? Hard Drive Freezes Computer When Connected There was a brief period of a couple of days after reformatting when everything was fine, so somehow I doubt it's any of those issues too. I have been having similar problems with my Acer computer. http://www.tomshardware.com/answers/id-2136027/stuttering-secondary.html Reply Bruce on September 9, 2008 at 11:02 pm I have a gateway computer and I added an extra hard drive to the computer and its not showing up on my

I suggest purchasing from a different manufacturer. Turn Off Hard Disk After Some SATA drives do have a jumper which controls the speed of the SATA drive itself, but you do not need to worry about anything related to master, slave or cable BUT I do NOT repair. I upgraded the IDE with a SATA adapter(should I remove the jumper then?).

Hard Drive Freezes Computer When Connected

You want to make sure to create the folders on the E:\E:\USERS\USER1E:\USERS\USER2Where user1/user2 is your log in name(s). have a peek at these guys However, it does still boot up and run windows. Secondary Hard Drive Freezing Computer I have a similar issue in that my PSU is fine with 3 HDDs on one SATA power cable, but won't boot if I use the 4th connector. Windows Won't Boot With Second Hard Drive Then I transferred all of my data back to the drive and everything is back to normal.

This drive works fine. this contact form I have a similar issue in that my PSU is fine with 3 HDDs on one SATA power cable, but won't boot if I use the 4th connector. The Hard-drive will appear again only at the: Control Panel-->Administrative Tools->Computer Management->Storage application. This was more than Helpfull in my Latest Conquest!!! Computer Freezes When Accessing Hard Drive

Before I changed my GPU on my previous rig, I changed my PSU first, cause I worry the power may not be sufficient for that GPU. My System Specs System Manufacturer/Model Number Home Build OS Windows 7 Home Premium 64 bit CPU Intel Core i3 2100 Motherboard ASUS P8Z68-V LX Memory Kingston DDR3 1600 - 8GB (2x4GB) It is up and running but now my computer does not recognize my second drive. have a peek here The worst part about installing hard drives is setting the jumpers on the drive so that it works correctly with your current hardware.

Easy to understand! Reboot And Select Proper Boot Device Also if I play music off of the secondary HD, the song will stutter for the first second or two. If it boots fine with one drive and not with two, you’re probably overloading the power supply.

Are there any messages in Event Viewer or firewall logs ?e.

in Installation & Setup Hi guys, Sorry about the title, i was unsure how to sum up this post in such few words. If this is the case, would I simply be better off mounting it in a new external enclosure? be sure the sata wires are in order, there are sata ports on the MB which are numbered , be sure to put port #1 for the OS drive then it Easybcd In your place with those issues, I would do all of these things, replace Cable, clean the contacts, and run a Drive Scan.

Let's get started:Turn the computer off, unplug it, and take the case off. When I insert the CD on the drive I am getting a dialog box that I require 256MB memory. Need to make sure the jumpers on the drive are set to ‘slave'. Check This Out Yor system shoud be less than 300 Watts, probably closer to 250 Watts when playing a game.

I have never installed a program into C:\ProgramFiles, D:\ProgramFiles or anything else with "programfiles" in it, I also have never had a file in MyDocuments, pictures in MyPictures or anything in Hardware & Devices HELP! Reply Johnny on December 6, 2008 at 5:19 pm Not sure what all the fuss was about in some of your earlier posts, but you made this post easy to understand. Choosing that option allows you to specify where the file is installed, and you can select the second hard drive as the file's destination.

Glad to hear that you got it sorted. Sound - Anytime a sound is first loaded there is about a 1-2 second stutter in which any audio currently playing is looped and the game hitches.On certain games switching inventory I can see the games in the folder under that drive. Otherwise I would have to get an IDE drive because I do have an extra IDE port.

Max diff for +12V between idle and load is 0.3V.Added HWMonitor: http://www.cpuid.com/softwares/hwmonitor.html artart00Apr 30, 2013, 7:41 AM Hello again,Yes the 360W and the 135W are for 12V1/12V2 and 3.3V/5V combined (respectively), There are two cables: the ribbon cable (or SATA cable) and the power cable. I forgot about formatting it. I am in a happy place now.

Everything works like a charm. I already know about master and slave. Click “Start Scan” to find Windows issues that could be causing PC problems. My PC is running on 2000XP with FAT32.